Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter on a Renault Twingo 1

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuel filter

See other generations:
Video tutorial

In this video, you can see how to replace the fuel filter on a Renault Twingo version 1: open the bonnet and unscrew the cap of the fuel filler neck, then lift the car onto a stand. The fuel filter is located under the vehicle: loosen the fastening with a screwdriver, then prepare a container for the fluids to drain and clean the pipe fittings with WD-40. Disconnect the fuel pipes from the filter using pliers, allowing the fuel to drain into the container.

Now install the new filter, paying attention to the flow direction. Connect the fuel pipes and tighten the fastening elements.

You can lower the vehicle back to road level; the job is complete.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Renault Twingo (1993-2007 / Twingo 1) In this video tutorial, you can see how to replace the fuel filter on a Renault Twingo by following some essential steps: the first thing to do is op…
Renault Twingo (1993-2007 / Twingo 1) To replace the fuel filter on a Renault Twingo, start by unscrewing the fuel filler cap. Raise the vehicle on a ramp (or from the rear), and using a …
Renault Twingo (1993-2007 / Twingo 1) Replacing the fuel filter on the Renault Twingo model 1 can be done independently, aided by our short video tutorial that will illustrate the steps t…

    Frequently Asked Questions

    • Twingo 2007-2014 - Where is the fuel filter located on the Renault Twingo II? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos