Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Renault Symbol

Model: Renault Symbol Symbol III - Years 2012-2019
Part: Seat

Today's main steps will show us how to disassemble the rear seats of the Renault Symbol. First, we open the rear doors and start lifting the seat cushions to detach and remove them from the cabin; then we unscrew the additional screws found on the backrest base, removing them if necessary, as shown in the video. At this point, we carry out the repair or cleaning of the rear seats; we then reassemble the backrests in order and then the seat cushions, securing all the bolts, following the reverse process of disassembly!

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Renault Symbol 2
Where to Find the Fuse Box of the Renault Symbol 2
Renault Symbol (2008-2012 / Symbol II) If you own a second-generation Renault Symbol and are wondering where the fuse box is located, follow the instructions below. First, completely turn …
How do you reset the partial odometer of the Renault Symbol?
How do you reset the partial odometer of the Renault Symbol?
Renault Symbol (2012-2019 / Symbol III) You can reset the partial odometer of the Renault Symbol by inserting the ignition key into the ignition switch in order to turn on the instrument pa…
How to Reset the Service Light in a Renault Symbol?
How to Reset the Service Light in a Renault Symbol?
Renault Symbol (2012-2019 / Symbol III) In this tutorial, you will see how to reset the service light in a Renault Symbol, an extremely simple and quick operation. Before doing this, ensure…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos