Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Front Bonnet of the Renault Twingo MK3

Model: Renault Twingo Twingo III, Twingo 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Body

See other generations:
Video tutorial

To top up the fluids in the Renault Twingo, you need to open the front bonnet for access to the filler necks. Stand in front of the vehicle, and on the driver's side of the grille, find a cap that, when removed, gives access to a lock where you will insert the car key to unlock a handle marked with a red sign.

You will find a similar handle on the passenger side of the grille; pulling the handles will unlock the bonnet. Grasp the part near the windscreen and pull towards you to access the fluid reservoirs and the battery.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on the Renault Twingo?
How to replace the starter motor on the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the starter motor on the Renault Twingo, open the bonnet to access the components located inside the engine compartment: here you will fin…
Replacing the Air Filter on a Renault Twingo
Replacing the Air Filter on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Learn how to remove the engine air filter from a Renault Twingo. Open the car door, pull up the engine compartment release lever located at the botto…
How to Open the Bonnet of the Third Generation Renault Twingo
How to Open the Bonnet of the Third Generation Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) In this short video, you will learn how to open the front bonnet of the third generation Renault Twingo. Unlike the classic lever under the driver's …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos