Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a Renault Symbol

Model: Renault Symbol Symbol III - Years 2012-2019
Part: Warning light – error code

In this video we can see how to reset the service light on a Renault Symbol (this same car is called Thalia in some markets). We need to press the button located on the lever satellite to the right of the steering wheel. Scroll through the menu using this button until you reach the service reminder. When the symbol with the wrench is displayed, continue pressing the button on the side of the lever until the display starts flashing: this is the beginning of the reset signal. When it stops flashing, it will indicate the mileage for the next service and the operation will be completed.

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Symbol
How to Reset the Service Light on the Renault Symbol
Renault Symbol (2008-2012 / Symbol II) In this tutorial, you will see how to reset the service light on the Renault Symbol, a very simple and quick operation. Before proceeding, make sure …
How to Reset the Service Light in a Renault Symbol?
How to Reset the Service Light in a Renault Symbol?
Renault Symbol (2012-2019 / Symbol III) In this tutorial, you will see how to reset the service light in a Renault Symbol, an extremely simple and quick operation. Before doing this, ensure…
How to Reset the Service Light on a Renault Symbol
How to Reset the Service Light on a Renault Symbol
Renault Symbol (2012-2019 / Symbol III) Whenever you change the engine oil and the corresponding filter on your vehicle, as specified in the owner's manual, you need to reset the service li…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos