Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Dashboard of a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Dashboard

See other generations:
Video tutorial

The procedure to follow for dismantling the dashboard of a Renault Clio 4 is clearly presented in the video, which shows where to start and how to proceed. First, remove the steering wheel by taking off the front cover and then unscrewing the central bolt.

Next, move on to the rear plastics of the steering wheel, then continue with the instrument cluster by first removing the trim, under which you will find the fastening screws, followed by the instrument cluster itself. Finally, remove all the perimeter screws of the dashboard, both upper and lower, and take out the entire structure.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to Remove the Dashboard of a Renault Clio
How to Remove the Dashboard of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) This guide provides step-by-step instructions to remove the dashboard of a Renault Clio. First, get inside the vehicle and start unscrewing the screw…
How to Dismantle the Dashboard on a Renault Clio?
How to Dismantle the Dashboard on a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To dismantle the dashboard on a Renault Clio, use a tool to pry off the horizontal trim located on the passenger side and partly on the driver's side…
How to Replace the Diesel Filter on Renault Clio
How to Replace the Diesel Filter on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the diesel filter on a Renault Clio, remove the filter as indicated in the guide. Remove the right wheel, then take off the plastic cover …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos