Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Wiper Blade

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
This video is currently unavailable

Here’s how to change the worn wiper blade. Lift the wiper control arm, rotate the wiper blade at a 90° angle to the arm, unclip the securing tab of the wiper blade and slide it off the arm. Before proceeding with the installation, check the length of the new wiper blade against the one just removed.

Insert the new wiper blade onto the control arm, align the securing nipple, and ensure it clips in correctly. Repeat the same process for the other wiper blade.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Vinyl Trim on Door Pillars
Replacing Vinyl Trim on Door Pillars
Saab 9 3 (1998-2003 / MK 1) To apply a new trim to the door pillars, first remove the window scraper seal and clean the underlying surface to prevent debris from getting under t…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Saab 9 3 (2002-2014 / MK 2) The cabin air filter is located near the right front windscreen wiper. Open the front bonnet and ensure it is securely supported. Between the windscr…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (1998-2003 / MK 1) Cleaning the cabin air filter is absolutely essential to avoid the unpleasant smell often noticed when first turning on the air conditioning. Therefo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos