Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a Saab 9-3

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Car stereo

How to remove the original radio from a Saab 9-3? Pay close attention to how to carry out the disassembly. Use original or aftermarket metal keys to remove the car stereo. Insert the keys into the holes on the plastic cover of the stereo (lock the keys), pull the stereo towards you as shown in the video, and carefully extract the radio while being mindful of the various wiring (disconnect the power connectors and the antenna cable). Finally, install the original radio or a generic brand one with the appropriate adapter for the input and connector.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the crankshaft position sensor in the Saab 9-5?
How to replace the crankshaft position sensor in the Saab 9-5?
Saab 9 5 (2010-2012 / Ys3g, MK 2) In this tutorial, we can see how to replace the crankshaft position sensor in the Saab 9-5, a very simple and quick operation. First of all, make sur…
How to replace the antenna of the Saab 9-5
How to replace the antenna of the Saab 9-5
Saab 9 5 (2010-2012 / Ys3g, MK 2) The steps to replace the roof antenna of a Saab 9-5 car are simple and quick to perform independently. The first step is to check that no water has e…
How to replace the gear knob of the Saab 9-5.
How to replace the gear knob of the Saab 9-5.
Saab 9 5 (1997-2010 / Ys3e, MK 1) If the gear knob in your Saab 9-5 first generation (year 1997-2010) is too worn out and you want to replace it yourself, then all you have to do is p…

Other guides you may be interested in

How to Remove the Timing Belt from a Nissan Juke

How do you remove the timing belt from a Nissan Juke? Raise the car on a column lift and remove the front wheel, using a screwdriver to detach the right wheel arch liner. Once these operations are complete: lift the bonnet, remove the engine soundproofing panel and the timing belt cover (from the wheel arch). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, adjusting until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, tightening everything with a socket spanner.

Watch the video!


by ScegliAuto

More videos