Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Air Filter

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Air filter

The engine air filter housing is located on the left side of the engine bay (when viewed from the front): once located, unscrew the clamp securing the intake pipe and disconnect it; then unscrew the screws securing the cover and remove the old filter. It is likely that there will be debris such as leaves inside the housing: remove them with a vacuum cleaner or compressed air, taking care that nothing falls into the intake ducts, insert the new filter, and refit the cover by tightening the securing screws; reattach the intake pipe and secure it with the clamp.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (2002-2014 / MK 2) The cabin air filter is located in the engine compartment, on the passenger side. Open the front bonnet and ensure it is securely supported. Remove t…
Replacement of Engine Air Filter, Oil Filter and Oil
Replacement of Engine Air Filter, Oil Filter and Oil
Saab 9 3 (2002-2014 / MK 2) Once the front bonnet is opened, the engine air filter housing is located on the passenger side: unscrew the fastening screws of the cover, lift it, …
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (1998-2003 / MK 1) Cleaning the cabin air filter is absolutely essential to avoid the unpleasant smell often noticed when first turning on the air conditioning. Therefo…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos