Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Improving Engine Performance

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

Installing this kit is very simple; connect the supplied cable between the device and the designated connector located under the passenger side dashboard. Following the programming instructions, this device can work dynamically with the hardware, ensuring maximum power from the engine at all times without risking the longevity of the mechanical parts.

It fully controls the onset of torque, develops the required map for the boost, precisely controls the ignition timing, fuel supply, heating, etc. This ensures that while there is an obvious improvement in vehicle performance, it does not cause damage to the engine itself.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacement of Engine Air Filter, Oil Filter and Oil
Replacement of Engine Air Filter, Oil Filter and Oil
Saab 9 3 (2002-2014 / MK 2) Once the front bonnet is opened, the engine air filter housing is located on the passenger side: unscrew the fastening screws of the cover, lift it, …
Engine Air Filter Replacement
Saab 9 3 (2002-2014 / MK 2) Open the bonnet and locate the filter housing on the left side of the engine. Disconnect the air intake hose by removing the hose clips to allow remo…
Replacement of Engine Air Filter
Replacement of Engine Air Filter
Saab 9 3 (2002-2014 / MK 2) Open the bonnet and locate the filter housing on the left side of the engine. Disconnect the air intake hose by removing the hose clips to allow the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos