Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front suspension on a Saab 9-3

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Suspension system

See other generations:
Video tutorial

In this video tutorial, you will see the instructions that will allow you to disassemble and replace the front suspension on your Saab 9-3. First, lift the vehicle and unscrew the bolts of the front wheel (in this case, the right one); once removed, take off the brake pad sensor cable, as shown in the video.

Next, unscrew the suspension bolt and disconnect the braking system from the suspension by unscrewing the two bolts; now disconnect the suspension from the engine bay by unscrewing the bolts on the top. All that’s left is to remove it and replace it with the new one!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a SAAB 9-3
How to Remove the Radio from a SAAB 9-3
Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…
How to Remove the Front Seat in a SAAB 93
How to Remove the Front Seat in a SAAB 93
Saab 9 3 (2002-2014 / MK 2) In this video tutorial, you can see how to remove the front seat in a SAAB 93 by following some simple steps: first, gather the tools needed to disas…
Replacing the Starter Motor on a Saab 9-3
Replacing the Starter Motor on a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Today's guide will show you the steps to remove and replace the starter motor on a Saab 9-3. First, raise the front of the vehicle and disconnect the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos