Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the air vents on the Saab 9-3

Model: Saab Saab Various
Part: Air vents

In this video tutorial we will see how to remove and replace the central air vents of the Saab 9-3, in simple and quick steps. First of all, let's get on board the car and start pulling our air vents towards you, perhaps with the help of a plastic lever; then unscrew the screws that we find below to remove, if necessary, the standard car radio (disconnecting the electrical wiring on the back), as shown in the video. At this point we can reassemble our components, inserting them perfectly in place until they are properly hooked!

Posted on 1 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Saab 9-3 service light
How to reset the Saab 9-3 service light
Saab Saab Various Let's see in this guide the instructions that will allow us to reset the service warning light of the Saab 9-3. First of all we get in the car and tu…
How to replace rear light bulbs on Saab 9-3 MK2
How to replace rear light bulbs on Saab 9-3 MK2
Saab Saab Various In today's video we will see how to remove and replace the rear light bulbs on a Saab 9-3, second series. First we open the boot lid and start by rem…
Guide for removing the fender / side strips on the Saab 9-3 MK2
Guide for removing the fender / side strips on the Saab 9-3 MK2
Saab Saab Various In this short guide we will discover the steps that will allow us to remove the side fenders or the fascias on the second series Saab 9-3. First we o…

Removal and Replacement of Mini Headlamp Washers

To remove and replace the headlamp washers on a Mini, proceed as follows: 1) Open the engine bay. 2) Disconnect the battery. 3) Remove the four bolts securing the headlamp to the car's frame, taking care of the different lengths of the bolts. 4) Gently lift the headlamp unit, remembering to disconnect the electrical connection and the rubber hose of the washer. 5) Remove and replace the washer using the two screws from the headlamp unit. 6) To reinstall the components, proceed in reverse, ensuring the correct positioning of all screws and electrical/hydraulic connections.

Watch the video!


by ScegliAuto

More videos