Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Timing Belt

Model: Saab 9 5 MK 1, Ys3e - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

This video shows how to remove and replace the timing belt in your car. First, remove all the covering plastics that obstruct the timing belt removal and lift the car using a ramp for better access. Next, unscrew the pulley that tensions the belt and proceed to remove the belt itself, paying close attention to the position of the other pulleys.

Then, remove the water pump and install a new one, securing it with gasket paste. After fitting the new belt, install a new tensioner pulley.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacement of Valve Lifters
Replacement of Valve Lifters
Saab 9 5 (1997-2010 / MK 1, Ys3e) Wear of the valve lifters is a common issue but can be easily resolved by removing only the upper part of the engine. Once the camshafts and old lift…
Instructions for Replacing the Alternator
Instructions for Replacing the Alternator
Saab 9 5 (1997-2010 / MK 1, Ys3e) The alternator is located at the rear left of the engine bay (when facing the front), in a rather awkward position. To facilitate the disassembly pro…
Replacement of the Complete Engine Gasket Kit
Replacement of the Complete Engine Gasket Kit
Saab 9 5 (1997-2010 / MK 1, Ys3e) First, check with a feeler gauge and an aluminium bar for any tolerances on the seating surface of the cylinder head as shown in the images. Use the …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos