Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Alternator

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Alternator

The alternator is located at the rear left of the engine bay (when facing the front), in a rather awkward position. To facilitate the disassembly process, it is recommended to lift the vehicle on a hydraulic lift or suitable axle stands, applying a jack or a hoist under the engine to support it since it will be necessary to remove the side engine mount; also remove the front right wheel to ease the removal of the auxiliary belt (loosen the tensioner by rotating it using a ratchet extension).
Once the belt is detached and the engine mount is removed, unscrew the mounting bolts and extract the alternator.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuel Pump Replacement Instructions
Fuel Pump Replacement Instructions
Saab 9 5 (1997-2010 / Ys3e, MK 1) If the car engine does not start, it is likely that fuel is not reaching the engine due to a failure of the submerged pump located in the fuel tank: …
Cylinder Head Bolt Replacement
Cylinder Head Bolt Replacement
Saab 9 5 (1997-2010 / Ys3e, MK 1) When removing the cylinder head to replace the gasket, it is preferable to use a new set of bolts to secure it; before doing so, re-thread the bolt h…
Instructions for Removing the Front Headlamp
Saab 9 5 (1997-2010 / Ys3e, MK 1) Open the front bonnet and ensure it is securely supported. Then, detach the front trim from the bumper by pulling it forward; similarly, unclip the s…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos