Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Saab 9-5

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Service warning light

The service indicator on the dashboard of your first-generation Saab 9-5 activates automatically whenever it is necessary to service the car. If even after servicing, the indicator remains on, then it is necessary to proceed with a manual reset. This is a very simple operation that you can complete in just a few seconds. All you have to do is enter the cabin and reach the driver's seat, then turn on the car and simultaneously hold down the "Clear" button until the reset confirmation message appears. Finally, release the "Clear" button and you are done.

Posted on 8 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Saab 9-5?
How to Reset the Service Light on a Saab 9-5?
Saab 9 5 (1997-2010 / Ys3e, MK 1) To reset the service light on a Saab 9-5, turn on the ignition and check that the maintenance message appears on the display. Using the buttons on th…
How to replace the antenna of the Saab 9-5
How to replace the antenna of the Saab 9-5
Saab 9 5 (2010-2012 / MK 2, Ys3g) The steps to replace the roof antenna of a Saab 9-5 car are simple and quick to perform independently. The first step is to check that no water has e…
How to Replace the Starter Motor in a Saab 9 5
How to Replace the Starter Motor in a Saab 9 5
Saab 9 5 (1997-2010 / Ys3e, MK 1) To replace the starter motor in a Saab 9 5, open the bonnet and access the components underneath, as the starter motor is located at the front of the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos