Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Saab 9-5?

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Service warning light

To reset the service light on a Saab 9-5, turn on the ignition and check that the maintenance message appears on the display. Using the buttons on the left side of the steering wheel, navigate through the menu on the instrument panel until you find the Service option. Once this option is reached, turn the key to switch off the instrument panel; then, turn the ignition back on and wait a few seconds for the reset of the light to be indicated.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Saab 9-5
How to reset the service light on the Saab 9-5
Saab 9 5 (1997-2010 / Ys3e, MK 1) The service indicator on the dashboard of your first-generation Saab 9-5 activates automatically whenever it is necessary to service the car. If even…
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
Saab 9 5 (2010-2012 / MK 2, Ys3g) In this tutorial, see how to replace the crankshaft position sensor on a Saab 9-5, a very simple and quick operation. First, ensure the engine is com…
How to Remove the LPG Injectors from the Saab 9-5
How to Remove the LPG Injectors from the Saab 9-5
Saab 9 5 (1997-2010 / Ys3e, MK 1) In this guide, follow the main steps to remove and replace the LPG injectors on the Saab 9-5. First, open the bonnet of your car and disconnect the L…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos