Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Saab 9-5

Model: Saab 9 5 MK 1, Ys3e - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Rear bumper

See other generations:
Video tutorial

This operation is very simple and quick; just follow this short video to understand how to remove the bumper from your vehicle. To release the side parts of the rear bumper, it will be necessary to remove the bolts that secure the inner wing to the inner bumper.

This operation must be repeated on both sides. Now, remove the screws securing the rear light, and then the clips securing the bumper at the bottom.

This way, you can pull the bumper towards you to install the new piece.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor in a Saab 9 5
How to Replace the Starter Motor in a Saab 9 5
Saab 9 5 (1997-2010 / MK 1, Ys3e) To replace the starter motor in a Saab 9 5, open the bonnet and access the components underneath, as the starter motor is located at the front of the…
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
How to Replace the Crankshaft Position Sensor on a Saab 9-5?
Saab 9 5 (2010-2012 / Ys3g, MK 2) In this tutorial, see how to replace the crankshaft position sensor on a Saab 9-5, a very simple and quick operation. First, ensure the engine is com…
How to replace the spark plugs on the Saab 9-5?
How to replace the spark plugs on the Saab 9-5?
Saab 9 5 (1997-2010 / MK 1, Ys3e) To replace the spark plugs on the Saab 9-5, open the bonnet to access the engine compartment. You will need to loosen the cover of the glow plugs, wh…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos