Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of a Seat Leon

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Spark plugs

See other generations:
Video tutorial

The replacement of the spark plugs of a Seat Leon model 1P vehicle is a task that can be carried out independently, also thanks to our short video tutorial that will guide us through the steps to be taken. The first step is to park the car on a flat surface, pull the handbrake and turn off the vehicle.

We open the front hood and proceed with the steps to carry out the replacement. The second step is to remove the engine cover by pulling on the sides.

The third step is to disconnect the tube and cover it with a cloth to prevent parts of the spark plugs from getting inside. The fourth step is to release the tabs of the coils and then remove them.

The fifth step is to remove the spark plugs. The sixth step is to insert the new spark plugs and insert the coils, then close the clips.

The seventh step is to reconnect the tube and close the engine cover.


Posted on 6 February 2025 by ScegliAuto


Related tutorials

Replacement of the spark plugs of the Seat Leon 3
Replacement of the spark plugs of the Seat Leon 3
Seat Leon (2012-2019 / 5F, MK 3) To replace the spark plugs of the Seat Leon, we open the hood, disconnect the side flexible hose from the engine cover and remove it. We cover the th…
How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2005-2013 / 1P) Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a…
How to Reset the Tyre Warning Light on a 2016 Seat Leon
How to Reset the Tyre Warning Light on a 2016 Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) If the tyre warning light on the instrument cluster of your 2016 Seat Leon keeps appearing despite no punctures or loss of pressure, follow these ste…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos