Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

In the Seat Ateca remote control, how do you replace the battery?

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

This video is currently unavailable

Is the remote control of your car no longer allowing you to open and close the doors? Unless the transponder is demagnetized or the remote control itself is damaged due to an impact, it is almost certainly due to a low battery. The video guide available here shows, for Seat keys in general, therefore also for the Seat Ateca, how to change it yourself: You need to have a small flathead screwdriver, with which, after extracting the emergency key, lever at the center of the plastic shell, in order to open it and have access to the battery.

We will also use the aforementioned screwdriver to remove it, then install the new battery and close everything back up.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

Replacement of the Seat Ateca key remote battery
Replacement of the Seat Ateca key remote battery
Seat Ateca (2016-2025 / MK 1) In a few simple steps, we will see how to disassemble and replace the battery of the remote control key of the Seat Ateca. First, take the remote con…
How to Replace the Remote Control Battery on a Seat Ateca?
How to Replace the Remote Control Battery on a Seat Ateca?
Seat Ateca (2016-2025 / MK 1) If the remote control for your Seat Ateca is not working, it likely means the battery is flat. This is usually the cause. The remote allows you to lo…
How to Replace the Remote Control Battery on a Seat Ateca?
How to Replace the Remote Control Battery on a Seat Ateca?
Seat Ateca (2016-2025 / MK 1) To replace the battery in the remote control of a Seat Ateca, use an object like a screwdriver to pry off the panel on the back of the device. At thi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos