Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs in a Seat Leon?

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we will see how to replace the rear headlight bulbs in a Seat Leon, a very simple and quick operation. First of all, let's make sure that the instrument panel is off, then we open the trunk lid, remove the cover located at the back of the headlight in question, and unscrew the white plastic nut. Next, we unscrew the two screws located along the inner edge of the headlight, separate it from the bodywork, and disconnect the power connector.

At this point, all that’s left is to open the internal base, replace the faulty bulb, and reassemble everything by following the reverse procedure.


Posted on 6 December 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs of the Seat Leon
How to replace the rear headlight bulbs of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) This short and simple guide will show us how to disassemble and replace the bulbs of the rear light of the Seat Leon. First, we open the rear hatch o…
Replacing the Rear Bulbs on the Seat Leon MK3
Replacing the Rear Bulbs on the Seat Leon MK3
Seat Leon (2012-2019 / 5F, MK 3) In this video tutorial, you will learn how to remove the rear light and replace its bulbs on the Seat Leon third series. First, open the boot and sta…
Removing the Rear Light of the Seat Leon
Removing the Rear Light of the Seat Leon
Seat Leon (2005-2013 / 1P) This guide outlines the steps to remove and replace the rear light of the Seat Leon. First, open the rear hatch of the boot and start unscrewing the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos