Do it yourself
Frequently asked questions about cars and motorcycles

How to Disinfect the Air Conditioning System of a Seat Leon MK1

Model: Seat Leon 1M - Years 1999-2005
Part: Air conditioner

Let’s see in this video how to disinfect the air conditioning system of a Seat Leon MK1: you will need a specific disinfectant for air conditioning systems, such as LiquiMoly, which can be found with the code 124164866645 on eBay for £21.99, with free delivery. You will need a long tube to reach the evaporator, for which you will need to remove the cover under the passenger compartment, unscrew the screws (side and centre) and disconnect the ambient light connector. Now remove the cover to access the evaporator drain tube. Start the engine, set the heating to maximum, ventilation to feet at maximum speed, and activate air recirculation. Run it like this for 10 minutes to dry the evaporator. Insert the spray tube into the drain tube (about 8/10 cm) and spray the entire dose onto the evaporator, moving the tube to cover the entire surface, then leave it to act for half an hour. Repeat the drying procedure as previously described, and reposition all parts for reassembly. It is advisable to protect the interior fabrics with a towel to avoid stains, and perform the operation in a well-ventilated area.

Posted on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (1999-2005 / 1M) When the air conditioning in your car, in this case, the Seat Leon 1, does not respond to your commands, it does not necessarily mean it is broken; i…
Seat Leon (2005-2013 / 1P) Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a…
Seat Leon (2012-2019 / MK 3, 5F) Start by extracting the physical key from your Seat Leon by pressing the silver button located at the top of the key. Once done, you need to unclip t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos