Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Wheel Bearing Replacement

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Bearing

See other generations:
Video tutorial

Obtain a replacement bearing. Lift the vehicle, secure it, and remove the wheel.

Take off the metal shield protecting the retaining bolt located on the hub, which will also need to be unscrewed. If you encounter difficulties, use some penetrating spray.

Dismantle the support assembly of the wheel until you can extract the driveshaft. Using a puller, remove the disc to access the bearing.

Remove the bearing's retaining circlip and use a puller to free the bearing. Clean thoroughly from old grease.

Then, place the new bearing inside after properly greasing it. Refit all the spacers that were previously removed.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Suspension Bushes of the Seat Ibiza
How to Replace the Front Suspension Bushes of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) This guide shows how to replace the front suspension bushes of the Seat Ibiza. For this operation, a special tool is needed to extract the old bush. …
Replacing the Camshaft Oil Seal
Replacing the Camshaft Oil Seal
Seat Ibiza (1993-2002 / 6K) To replace the camshaft, you need to remove the pulley, which involves working on the timing system, including replacement and re-timing. The belt mu…
Replacing the Timing Belt on the Seat Ibiza 1.0 MPI
Replacing the Timing Belt on the Seat Ibiza 1.0 MPI
Seat Ibiza (2008-2017 / 6J, 6P) Below are the steps to remove and replace the timing belt on the Seat Ibiza 1.0 MPI. First, lift the vehicle and start by removing the front right wh…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos