Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Camshaft Oil Seal

Model: Seat Ibiza 6K - Years 1993-2002
Part: Engine

To replace the camshaft, you need to remove the pulley, which involves working on the timing system, including replacement and re-timing. The belt must then be refitted correctly, as incorrect tension can cause serious engine damage. Both pulleys and the belt are marked. Put the vehicle in neutral and turn the crankshaft pulley bolt until the marks align. To facilitate this procedure, you can remove the spark plugs. When removing the oil seal, be careful not to damage the seating and ensure it is cleaned thoroughly.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Ibiza (1993-2002 / 6K) Before fitting the new valve lifters, generously lubricate their seats, then position the lifters and the new camshaft: the camshaft must also be lub…
Seat Ibiza (1993-2002 / 6K) Before applying the new gaskets, clean the respective seats thoroughly, removing any dirt and deposits; position the sealing rings on the heads of th…
Seat Ibiza (1993-2002 / 6K) After having the cylinder head skimmed, check the flatness of the surface using a straight edge and a feeler gauge for valves; apply the new exhaust …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos