Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Seat Ibiza 6L

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

Learn how to replace the spark plugs on a Seat Ibiza 6L: open the bonnet and disconnect the PCV valve cable, then remove the engine cover; cover the throttle body with a cloth to prevent dirt ingress; unscrew and remove the oil filler tube, and also cover this filler hole with a cloth for the same reason.

Unlock the coil connectors with a flat screwdriver, unscrew the earth terminal and remove the coils from the spark plug wells; disconnect the electrical connectors and clean the spark plug wells of dirt and debris.

Unscrew the worn spark plugs, apply copper grease to the threads of the new plugs, and install them by hand, then tighten them with a torque wrench to 25 Nm. Clean the connectors with an electronic spray and reconnect them; refit the coils into the wells, secure the connectors, and screw in the earth terminal, reinstall the oil tube (removing the protective cloths) and refit the engine cover.


Posted on 30 April 2026 by ScegliAuto


Related tutorials

Replacement of the spark plugs on the Seat Ibiza 1.4
Replacement of the spark plugs on the Seat Ibiza 1.4
Seat Ibiza (2002-2009 / 6L) Today's step-by-step instructions will allow us to disassemble and replace the spark plugs of the Seat Ibiza 1.4. First, we open the car's engine hoo…
Removing the Spark Plugs from Your Seat Ibiza
Removing the Spark Plugs from Your Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Want to remove the spark plugs from your Seat Ibiza and don't know how? This video details how to proceed. Pull the bonnet release lever located to t…
…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos