Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the spark plugs on the Seat Ibiza 1.4

Model: Seat Ibiza 6L - Years 2002-2009
Part: Spark plugs

Today's step-by-step instructions will allow us to disassemble and replace the spark plugs of the Seat Ibiza 1.4. First, we open the car's engine hood and start by removing the upper plastic cover of the engine; then we unscrew the oil cap and unclip the coil wiring harnesses, as shown in the video. At this point, we remove the spark plug boots and use a socket wrench with an extension to unscrew and remove them, replacing them with new ones (of the correct type and with the same pitch); we hand tighten the new spark plugs and then gently tighten them.

Posted on 29 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Spark Plugs from Your Seat Ibiza
Removing the Spark Plugs from Your Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Want to remove the spark plugs from your Seat Ibiza and don't know how? This video details how to proceed. Pull the bonnet release lever located to t…
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…
Fuse Diagram for the 2002 Seat Ibiza
Fuse Diagram for the 2002 Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The 2002 Seat Ibiza has two fuse boxes. The first is located in the engine compartment next to the battery. The second can be found inside the cabin,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos