Do it yourself
Frequently asked questions about cars and motorcycles

How to change the spark plugs on a Seat Ibiza 3 6L

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

In this video we see how to change the spark plugs on a Seat Ibiza 1.2 16V (6L engine). Make sure the engine is cold and disconnect the negative battery cable; remove the engine cover and remove the ventilation system tube; often the oil cap is also in the way, so remove it and cover the opening and throttle body with lint-free cloths.

Disconnect the electrical connectors of each coil, unscrew the ground terminal that secures the coil group, remove the coils and number them to be able to put them back in their place. Clean carefully around the spark plug to prevent dirt from falling into the well, then remove the spark plug with a 16 mm socket with extension.

Before inserting the new spark plug, apply a light amount of copper paste on the threads. Screw it in by hand initially, and then tighten it to 25 Nm with a torque wrench.

Put the coils back in place, pushing them until you hear a "click"; put the connector back in place. Remove the protective cloths, reassemble the oil cap and PCV tube, reassemble the engine cover and reconnect the negative battery cable.

Job done.


Posted on 27 August 2025 by ScegliAuto


Related tutorials

Seat Ibiza (2002-2009 / 6L) Today's step-by-step instructions will allow us to disassemble and replace the spark plugs of the Seat Ibiza 1.4. First, we open the car's engine hoo…
Seat Ibiza (2002-2009 / 6L) Want to remove the spark plugs from your Seat Ibiza and don't know how? This video details how to proceed. Pull the bonnet release lever located to t…
Seat Ibiza (2017-2026 / KJ, 6F) In this video we will see how to replace the spark plugs on a Seat Ibiza IV: we open the hood and remove the engine cover. With a screwdriver, we dis…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos