Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Boot Release Button of the Seat Altea

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Trunk lock

Video tutorial

In this tutorial video, you will find step-by-step instructions to remove and replace the boot closure button of the first series Seat Altea. First, open the tailgate and start by removing the panel or plastic cover; to do this, unscrew the fixing screws, as illustrated in the video.

Next, disconnect the electrical connector of the lock by unscrewing the fixing screws to remove it; then replace it with the new one and insert it onto the emblem of your car, following the video to the end!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing the Bulb of the Rear Light on the Seat Altea
Replacing the Bulb of the Rear Light on the Seat Altea
Seat Altea (2004-2015 / MK 1) Here are the useful steps to remove and replace the bulb of the rear light on the Seat Altea. First, open the boot lid and begin unscrewing the fixin…
Replacement of the third brake light bulbs of the Seat Altea XL.
Replacement of the third brake light bulbs of the Seat Altea XL.
Seat Altea (2004-2015 / MK 1) In this video tutorial, we will see how to disassemble and replace the brake light bulb of the third stop of the Seat Altea, in simple steps. First, …
Replacing the Rear Light on a Seat Altea
Replacing the Rear Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) The following steps will show you how to remove and replace the rear light on a Seat Altea, following the instructions below. First, open the tailgat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos