Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Battery from a Seat Ibiza 3 1.4 TDI

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the engine battery of a Seat Ibiza 1.4 TDI, third series. First, open and lift the car's bonnet; then remove the battery bracket securing bolt using a socket spanner.

Once the bracket is removed, disconnect the two terminals (positive and negative) using a socket spanner; then remove the control unit located above the battery. Finally, lift and remove the battery as shown in the video; replace it with the new one and reassemble everything!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

When to replace the timing belt on a Seat Ibiza 1.2 TDI?
When to replace the timing belt on a Seat Ibiza 1.2 TDI?
Seat Ibiza (2002-2009 / 6L) Among the various periodic replacements to carry out on your vehicle, such as the Seat Ibiza 1.2 TDI, is the timing belt. The manufacturer specifies …
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6J, 6P) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…
Location of the Alternator on a Seat Ibiza 6L
Location of the Alternator on a Seat Ibiza 6L
Seat Ibiza (2002-2009 / 6L) As shown in the video, the alternator on the Seat Ibiza 6L is located at the front of the engine, connected to the auxiliary belt. It is mounted low …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos