Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Seat Ibiza 6L

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to reset the service light on a Seat Ibiza 6L by following a few simple steps that will help you manage your vehicle independently: if you notice a small spanner icon next to the daily odometer with a custom OIL sign, indicating that it's time for an oil change, and INSP (which means inspection service), it is time to carry out a service on the vehicle.

To remove this warning, first perform maintenance on the vehicle, such as changing the engine oil and filters.

After completing the DIY service, get in the car, turn off the engine, and pull the handbrake. Press and hold the button located under the speedometer, then turn the key to the 'on' position without starting the engine; keep holding the button under the speedometer for another 10 seconds.

At this point, dashes should appear on the display. Continue holding the button and then release it; the warnings for the "spanner", "OIL", and "INSP" should disappear.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
Seat Ibiza (2017-2026 / KJ, 6F) In this video tutorial, you will learn how to reset the service light on the 2020 Seat Ibiza. For those opting for a DIY approach, this is certainly …

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2008-2017 - What does the "Insp" light on a Seat Ibiza mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos