Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight of the Seat Altea.

Model: Seat Altea MK 1 - Years 2004-2015
Part: Headlight

In this video tutorial, we will see how to disassemble and replace the front headlight of the Seat Altea, following the instructions below. First, we open the car's engine hood and start by removing the front bumper; to do this, we unscrew all the fastening screws, including those located on both sides of the front wheel arches, as shown in the video. At this point, we unscrew the fastening screws of the front headlight, disconnecting the electrical connector of the bulbs to remove it; if necessary, we replace the lights and finally reassemble the front light unit, applying the reverse procedure!

Posted on 21 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Seat Altea
How to replace the headlight bulb of the Seat Altea
Seat Altea (2004-2015 / MK 1) To replace the headlight bulb of the Seat Altea, you first need to remove the headlight from its housing. To remove the headlight, we need to unscrew…
How to mount the headlight of a Seat Altea
How to mount the headlight of a Seat Altea
Seat Altea (2004-2015 / MK 1) Let's see how to mount the headlight of a Seat Altea. We open the bonnet by pulling the bonnet opening lever and put it in safety. We remove the fron…
Replacement of the front headlight bulb of the Seat Altea.
Replacement of the front headlight bulb of the Seat Altea.
Seat Altea (2004-2015 / MK 1) Today's steps will show us how to disassemble and replace the headlight bulb of the Seat Altea, following the instructions below. First, we open the …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos