Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Seat Alhambra?

Model: Seat Alhambra MK 2 - Years 2010-2020
Part:

In this tutorial, we can see how to reset the tire pressure warning light in the Seat Alhambra, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, locate the button depicting the warning light in question located on the central console, press and hold it in position for the necessary time for the light itself to disappear from the dashboard. Finally, restart the instrument panel.

Posted on 28 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Seat Alhambra?
How to reset the Service light on the Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To reset the Service light on the Seat Alhambra, press and hold the button located on the central right side of the instrument panel while it is off.…
How to reset the tire pressure warning light in the Seat Alhambra?
How to reset the tire pressure warning light in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) Resetting the tire pressure light in the Seat Alhambra, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding…
How to reset the tire pressure warning light in the Seat Alhambra?
How to reset the tire pressure warning light in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial we can see how to reset the tire pressure warning light in the Seat Alhambra, an extremely simple and quick operation, to be carried…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos