Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level of a Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Engine oil

Checking the engine oil level should be done periodically to monitor any losses that could be due to a leak or oil consumption by the engine itself. In the latter case, an engine overhaul may be necessary. After parking the car on a level surface, turn off the engine and wait a few minutes for the oil to drain into the sump. Open the bonnet and locate the dipstick, which usually has a yellow or orange loop handle. Remove the dipstick, wipe the end with a clean cloth, and reinsert it fully before removing it again to check how far it is coated in oil. Top up if the level is at the minimum.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Change and Oil Filter Fitting on a Seat Leon
Engine Oil Change and Oil Filter Fitting on a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) Before proceeding with the engine oil change and fitting the oil filter on the car, position your Seat Leon on a ramp or flat surface (to work undern…
How to Replace the Oil Filter in the Seat Leon
How to Replace the Oil Filter in the Seat Leon
Seat Leon (2005-2013 / 1P) Open the car's bonnet, pull the dipstick, and lift it on the ramp. Open the breather and let the engine oil drain out. Now unscrew and replace the oi…
How to Reset the Oil Service on the Seat Leon?
How to Reset the Oil Service on the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) As shown in this tutorial, resetting the oil service on the Seat Leon is a very simple and quick operation. Before doing this, ensure that you have c…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos