Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper Reflector on a Skoda Octavia

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

In this guide, we will discover the instructions to remove and replace the rear bumper reflector on a Skoda Octavia. First, move to the rear of the vehicle and start prying at the side slot of the reflector using thin plastic levers, being careful not to damage the bodywork.

Once the reflector is detached, clean the internal seat properly, as shown in the video. At this point, install and secure the reflector correctly on the rear bumper, replacing the other reflector in the same manner if necessary.


Posted on 25 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on a Skoda Octavia
How to Remove the Rear Light on a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Removing the rear light on a Skoda Octavia? Are you looking to replace the light or the bulbs? Here’s how to do it. Remove the fabric panel covering …
How to Remove the Front Headlights on Skoda Octavia 2
How to Remove the Front Headlights on Skoda Octavia 2
Skoda Octavia (2004-2012 / 1Z, MK 2) In today's video, we will see how to remove the front headlights on a second-generation Skoda Octavia in simple and quick steps. First, open the bonn…
How to Change the Rear Light of a Skoda Octavia
How to Change the Rear Light of a Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Want to remove the rear light of your Skoda Octavia? Here’s how to take it out from the bodywork of the car. Lift the boot lid, detach the plastic co…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos