Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bolero Radio on Skoda Octavia

Model: Skoda Octavia 1Z, MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

Using a plastic lever (if you use a metal screwdriver, be careful not to scratch the dashboard), lift the trim of the onboard computer at all points and detach it. Now, using the same method, lift the plastic that was under the previous trim. At this point, the securing screws of the radio will be exposed, which you can then unscrew.

Literally pull the radio out and remove it from its housing, then disconnect the wiring. To install the new Bolero radio, proceed in reverse: connect the wiring exactly as it was on the previous one, screw it in, and fit the trims.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Remove the Stock Radio from a Skoda Octavia 2015
How to Remove the Stock Radio from a Skoda Octavia 2015
Skoda Octavia (2012-2019 / 5E, MK 3) Removing the stock radio from your Skoda Octavia 2015 is very simple, and with the instructions in this mini guide, you will be able to carry out the…
How to Remove the Radio from a Skoda Octavia
How to Remove the Radio from a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Want to remove the radio from your Skoda Octavia and don't know how? Follow this guide to remove the original stereo. Remove the stereo trim using a …
How to Install the Bluetooth Module in a Skoda Octavia
How to Install the Bluetooth Module in a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) In this guide, discover the instructions that will allow you to install the Bluetooth module in a Skoda Octavia. First, get inside the vehicle and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos