Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Rapid
  6. : Where is the fuse for the central locking located in the Skoda Rapid?

Skoda Rapid - Video tutorial

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Checks and maintenance
Operation: Where is the fuse for the central locking located in the Skoda Rapid?

In case the central locking system of our Skoda Rapid suddenly stops working, and the battery of the remote control is charged, we can first check the status of the respective fuse, whose location is indicated in this video. As shown, it is located in the box inside the cabin, in the lower area of the dashboard on the driver's side, and is labeled with the code F2. If it is faulty, make sure to use a replacement with the same specifications and always operate with the vehicle turned off, so as not to cause any damage to the various connected devices.


Posted on 6 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos