Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : How to replace the battery of the key for the Skoda Fabia 2019.

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark3, NJ - Years 2014-2021
Part: Key
Operation: How to replace the battery of the key for the Skoda Fabia 2019.

In this new guide dedicated to all of you who own a 2019 Skoda Fabia, we will discover the steps to follow if you want to complete the replacement of the battery located inside the car key. First of all, you need to take the key and press the metal button located at the top, then use a small flathead screwdriver to remove the back cover of the key and proceed with the removal of the exhausted battery. Finally, insert the new battery (CR 2025 model) and correctly reassemble the back cover.


Posted on 29 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Fabia 1999-2007 - How do you program the key for a Skoda Fabia? Read Answer
    • Fabia 2014-2021 - What are the ignition problems with the key on the Skoda Fabia? Read Answer
    • Fabia 2007-2014 - Why does the Skoda Fabia not detect the key? Read Answer
    • Fabia 2014-2021 - Why does the Skoda Fabia remote control no longer work? Read Answer
    • Fabia 2014-2021 - How to replace the remote control battery of the Skoda Fabia? Read Answer
    • Fabia 2007-2014 - How to replace the key battery of a Skoda Fabia? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos