Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Car Suspension

Model: Skoda Roomster MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Suspension system

Video tutorial

This practical guide shows how to replace your car's suspension. The suspension helps absorb the shocks that reach the vehicle through the compression and expansion of a gas contained within.

Each suspension unit consists of a sealed rubber spring, utilising the compressed air generated by the compressor; without these, the wheels would lose grip on the road, leading to a loss of vehicle control. The first step is to lift the car with a jack and remove the wheel: put it in reverse and engage the handbrake, then remove the inner wheel arch, which is secured by three plastic nuts, pushing from the bottom upwards to release it. Once done, the wheel arch comes off easily; now position the jack under the cradle on the shock absorber side.

When it comes out, align the vehicle to facilitate removal, then unscrew the bolt that holds the shock absorber using the same procedure as the lower one. Proceed to fit the new part: secure the lower part first; once done, it may not be aligned, just press while looking from the side, and you will be able to secure the bolts easily.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Skoda Roomster (2006-2015 / MK 1) Let’s look at removing the headlight bulbs on a Skoda Roomster. Lift the bonnet by pulling the lever located at the bottom right of the dashboard and…
Skoda Roomster (2006-2015 / MK 1) If some devices in your Skoda Roomster have suddenly stopped functioning, first check the status of the relevant fuses, as indicated in this video. T…
Skoda Roomster (2006-2015 / MK 1) This guide provides step-by-step instructions on how to remove and replace the front headlamp on a Skoda Roomster. First, open the bonnet of the vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos