Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Tie Rod End on a Skoda Roomster

Model: Skoda Roomster MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tie rods

Video tutorial

If you hear a noise coming from the wheel when turning, possibly accompanied by play in the steering wheel that increases on uneven surfaces, it is likely that the ball joint of the tie rod end (or axial joint) of the steering box is damaged; replacing it is straightforward and by taking some precautions, you might avoid the need for a wheel alignment.

Therefore, lift the vehicle and remove the front wheel, unscrew the nut securing the tie rod end to the hub support, and before extracting the pin with the appropriate tool, loosen the lock nut. At this point, complete the disassembly by counting the number of turns needed for removal; then screw in the new tie rod end the same number of turns, secure it to the hub, and tighten the lock nut before refitting the wheel.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Skoda Roomster?
What is the Fuse Diagram for the Skoda Roomster?
Skoda Roomster (2006-2015 / MK 1) In this video, you can see the fuse diagrams for the Skoda Roomster and the location of the respective boxes, to consult in case you need to check th…
How to reset the trip odometer in the Skoda Roomster?
How to reset the trip odometer in the Skoda Roomster?
Skoda Roomster (2006-2015 / MK 1) In this tutorial, we will see how to reset the trip odometer in the Skoda Roomster, a very simple and quick operation. This odometer can be useful, f…
How to reset the service light on the Skoda Roomster?
How to reset the service light on the Skoda Roomster?
Skoda Roomster (2006-2015 / MK 1) In this tutorial, we can see how to reset the service in the Skoda Roomster, an extremely simple and quick operation, to be carried out only once all…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos