Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch actuator of the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: Clutch

In order to replace the clutch actuator on the Smart, you need to lift the car with a jack or a lift, so that it is possible to locate the clutch actuator at the rear of the vehicle: here, you can loosen the screws that hold it to its housing, also disconnecting all the appropriate connectors. At this point, you can remove the old actuator from its housing, so that the new one can be inserted; the new one must be properly fixed and connected, ensuring that everything works correctly.

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How does the clutch actuator of the Smart Fortwo work?
How does the clutch actuator of the Smart Fortwo work?
Smart (1998-2007 / 450) In this short and simple guide, we will see how the clutch actuator of the Smart Fortwo works. The clutch actuator of this car works electronically a…
How do you replace the clutch actuator of the Smart car?
How do you replace the clutch actuator of the Smart car?
Smart (2007-2015 / 451) In order to replace the clutch actuator of the Smart car, you need to lift the car using a jack or a lift, so that you can have access to the area un…
Smart Fortwo and Roadster clutch actuator replacement
Smart Fortwo and Roadster clutch actuator replacement
Smart (1998-2007 / 450) We see in this video the instructions to be able to disassemble and replace the clutch actuator on a Smart Fortwo and Roadster. First we go to identi…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos