|
Do it yourself
| |||
| ||||
What are the main reasons why the Start & Stop function does not work on a Smart 453?
Model: Smart Smart
453
- Years 2014-2022
In this video we see the main reasons why the Start & Stop function does not work on a Smart 453. However, the reasons are also valid for all other cars. First of all, seat belts must be correctly fastened for all occupants and doors must be properly closed; the tailgate and hood must be perfectly closed; air conditioning must not be on for defogging; the battery must be sufficiently charged, normally above 85% of its capacity; then the temperature we have set inside the car matters, if the air conditioner has to make a significant effort to reach it, then the Start & Stop will not engage; the Start & Stop does not work when the engine is cold; the engine must be warm; even an excessively hot or cold external temperature negatively affects it.
Posted on 1 October 2024 by ScegliAuto
Video tutorial
Related tutorials
Smart
(2014-2022 /
453)
Let's see how to deactivate the start & stop on the Smart 453 (and also on the Renault Twingo). The temporary solution is the one shown in the video,…
Smart
(2014-2022 /
453)
It will be possible to deactivate the Start&Stop of the Smart by turning on the instrument panel and then locating the button with the letter A insid…
Smart
(2014-2022 /
453)
In this guide, we will see the main instructions that will allow us to activate and deactivate the Start&Stop system of the Smart Fortwo. First of al…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.116
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
