Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Smart 453 2015?

Model: Smart Smart 453 - Years 2014-2022
Part: Checks and maintenance

In this new mini guide aimed at all of you who own a Smart 453 (year 2015), we will guide you step by step in locating the OBD port inside the cabin. Start by reaching the front passenger seat and then focus your attention on the lower area of the glove compartment and locate the OBD port of your Smart 453. At this point, remove the protective cover and connect a diagnostic tool to the OBD port if you need to analyze any errors detected by the vehicle's control unit.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Smart 453?
Smart (2014-2022 / 453) To be able to find the OBD port located in the interior of your Smart 453, you must follow the few simple steps described in this new guide addressed…
How do you reset the Service light on the Smart car?
How do you reset the Service light on the Smart car?
Smart (2014-2022 / 453) In order to reset the Service light on the Smart, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the…
Where is the OBD port located on the Smart Fortwo 453?
Where is the OBD port located on the Smart Fortwo 453?
Smart (2014-2022 / 453) To locate and use the OBD port inside your Smart Fortwo 453, you don't need to disassemble any components. All you have to do is carefully read the f…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos