Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Smart Forfour 454

Model: Smart Smart Fourfour1, 454 - Years: 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

If you intend to perform a detailed analysis on the ECU of your Smart Forfour 454 but do not know where the OBD port is located, just read the following guide and follow the various steps. First of all, remember that the car must be completely off for safety reasons.

At this point, reach the driver's seat and proceed to remove the entire plastic panel located at the bottom of the dashboard. Then locate the OBD port you were looking for and connect a diagnostic tool to it.


Posted on 21 April 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Smart Forfour 454
Replacing the Headlight Bulb on the Smart Forfour 454
Smart (2004-2006 / Fourfour1, 454) In this video, we will see how to remove and replace the dipped beam xenon bulb of the Smart Forfour 454 with the headlight removed. First, remove th…
Where is the OBD port located on the Smart 454?
Where is the OBD port located on the Smart 454?
Smart (2004-2006 / Fourfour1, 454) In the following guide addressed to those of you who own a Smart 454, we will help you easily find the OBD port located in the cabin. First, reach th…
Where are the fuses located in the Smart Forfour?
Smart (2004-2006 / Fourfour1, 454) The fuses in the Smart Forfour are located inside the only fuse box present in the vehicle: this is found within the cabin, at the lower left part of…

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos