Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Boot of a Smart Fortwo

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

This is a very simple maintenance task. To open the rear boot of a Smart Fortwo, press the button located above the handle of the rear boot, then lift the glass.

The boot of the Smart is divided into two sections. Pull the lever upwards until the lock clicks; lower the rear boot until it locks into place on the metal guides.

Carry out maintenance inside the boot or the engine compartment. To close the boot, lift the lower section first, then the upper section (rear window).


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Open the Boot Lid of the Smart Fortwo
How to Open the Boot Lid of the Smart Fortwo
Smart (2007-2015 / 451) In this brief and simple guide, find out how to open the rear boot lid of the Smart Fortwo. First, move to the back of the vehicle and start by openi…
How do you install the spoiler on the Smart ForTwo?
How do you install the spoiler on the Smart ForTwo?
Smart (2007-2015 / 451) In order to install the spoiler on the Smart ForTwo, you need to open the rear hatch so that you can locate the trim on the top inside the hatch: thi…
Removing the Rear Tailgate Panel of the Smart Fortwo
Removing the Rear Tailgate Panel of the Smart Fortwo
Smart (2007-2015 / 451) Briefly follow the instructions to remove and replace the rear tailgate panel and the rear wiper seal of the Smart Fortwo. First, open the rear tailg…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos