Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Speedometers on a Smart Fortwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument cluster

See other generations:
Video tutorial

To remove the speedometers on a Smart Fortwo, first remove the panel located near them, which contains the hazard light button and door lock. To do this, simply pry at the surrounding gaps with a plastic wedge or a small flat screwdriver until fully extracted.

Once done, disconnect the connector using the flat screwdriver. You will now have access to all the screws securing the speedometers and the upper section of the central dashboard.

Unscrew them and lift the central dashboard trim just enough to remove the "dials".


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob from a Smart ForTwo
How to Remove the Gear Knob from a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…
How to Replace the Instrument Cluster Bulb of the Smart Fortwo
How to Replace the Instrument Cluster Bulb of the Smart Fortwo
Smart (2004-2006 / Fourfour1, 454) Today, you will learn quickly and easily how to replace the bulb of the rev counter or clock in your Smart Fortwo. This operation takes 5-10 minutes …
How to Remove the Front Bumper of a Smart ForTwo
How to Remove the Front Bumper of a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before you start, open the doors of your Smart ForTwo. Begin by unscrewing and removing the screws that secure the front bumper along the lower pilla…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos