Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Injectors on a Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel injectors

See other generations:
Video tutorial

Let’s see how to remove the injectors from the Smart Fortwo. First, lift the hatch covering the boot.

Disconnect the electrical connectors from the battery (unscrew them). Using the appropriate insert, unscrew the injectors.

Use a socket wrench to unscrew and extract the injectors from the cylinder head; take the new injectors and insert them into the cylinder head using the socket wrench. Connect the power connectors and refit the cylinder head cover once the replacement is complete.

Test the vehicle's operation after all parts have been fitted.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Smart Fortwo 450?
How to Replace the Cabin Filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) Replacing the cabin filter in the Smart Fortwo 451 takes about 20 minutes. The filter is located inside the cabin, near the accelerator pedal. To cha…
How to Open the Bonnet of a Smart ForTwo
How to Open the Bonnet of a Smart ForTwo
Smart (2007-2015 / 451) Before you begin, exit the cabin of your Smart ForTwo and head to the front of the car. Start by releasing the catches located inside the front grill…
How to Replace the Spark Plugs on a Smart ForTwo
How to Replace the Spark Plugs on a Smart ForTwo
Smart (2007-2015 / 451) Before you start, open the rear hatch of your Smart ForTwo. Begin by removing the engine cover. Next, unscrew and remove the bolts securing the conne…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos