Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program a Smart key?

Model: Smart Smart 453 - Years 2014-2022
Part: Key

In order to code the Smart key, it is necessary to insert the blank key into the ignition of the car and turn it to position two to turn on the dashboard: at this point, it will be necessary to connect a diagnostic tool to the OBD port of the vehicle. In this way, you can follow the instructions in the tutorial, selecting the model of the car in question and the corresponding version; by doing so, you can ensure that the key is coded. It will be possible to use it to verify that it works and finally, you can disconnect the scanner and turn off the dashboard.

Posted on 16 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Smart 454 after replacing the battery?
How do you program the key of the Smart 454 after replacing the battery?
Smart (2004-2006 / 454, Fourfour1) In the event that the ignition key battery of the Smart 454 runs out, it will need to be replaced. It may also be necessary to program its code, othe…
How to program the Smart key
How to program the Smart key
Smart (2007-2015 / 451) If we need to program a second opening key for our car, we can proceed by following the instructions given in this description and helping ourselves …
How do you program the Smart key?
How do you program the Smart key?
Smart (2007-2015 / 451) It will be possible to program a new key for the Smart by inserting the blank key into the corresponding block and then turning it to start the instr…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Peugeot 106

How do we remove the right door panel of a Peugeot 106? Let's see together in this video how to proceed. Use a lever to remove the plastic cover of the door handle, then, with a screwdriver, undo the securing screws on the plastic panel. Once all the screws are removed, detach the plastic clips that secure the door. Remove the window crank. With your hands, take off the door panel, disconnect any power connectors and release cable. Remove the window regulator motor inside the door by peeling off the adhesive protection.

Watch the video!


by ScegliAuto

More videos