Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the EGR valve from the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: EGR valve

In order to remove the EGR valve from the Smart car, you need to open the rear hatch so that you can access the engine compartment. Underneath it, you will be able to locate the EGR valve, directly connected to the exhaust manifold. To remove it from its housing, you will need to loosen the screws that hold it in place and then disconnect the appropriate connectors. This way, you will be able to completely remove the old component and insert the new one. By properly fastening and connecting it, you can verify that everything is functioning correctly.

Posted on 3 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and clean the EGR valve of the Smart Fortwo
How to disassemble and clean the EGR valve of the Smart Fortwo
Smart (1998-2007 / 450) In this guide we will see the main instructions that will allow us to disassemble and clean (or replace) the EGR valve of the Smart Fortwo. First of …
How to remove the intercooler of the Smart Fortwo 0.8 CDI
How to remove the intercooler of the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) Let's see in this short video the main steps that will allow us to remove and replace the intercooler of the Smart Fortwo, with 0.8 CDI engine. First…
How to remove the EGR valve of a Smart ForTwo
How to remove the EGR valve of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we can begin, we will have to open the tailgate of our Smart ForTwo, and then reach the engine compartment. So let's start by disconnecting th…

Other guides you may be interested in

How to Replace the Fog Light Bulb on a Renault Scenic

Let's see how to replace the fog light bulb on a Renault Scenic. Lift the car onto a column lift and secure it. Prepare to remove the plastic cover at the bottom of the engine using a suitable socket wrench, reaching the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached pins. Test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos