Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the clutch in the Smart car.

Model: Smart Smart 451 - Years 2007-2015
Part: Clutch

In today's video, we will see how to replace the clutch in the Smart 451. First, we lift the car on the lift to make the work easier. We go to the back and locate the component to be replaced. Once done, we begin the removal process by extracting the closing components. We then insert the new clutch, along with its disc and other components, and reassemble everything properly. Once done, we can finish the job and lower the car. We test the component on the road to ensure everything is working correctly and then complete the job.

Posted on 13 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Smart (2007-2015 / 451) In order to replace the clutch of the Smart 451, you need to access the car's engine compartment, which is located immediately under the tailgate. He…
Smart (2014-2022 / 453) Let's see how to replace the clutch on the Smart 453. To access the clutch, first of all, you need to disassemble the rear bumper of your car, unscre…
Smart (1998-2007 / 450) Below we will see the main instructions that will allow us to carry out the relearning of the clutch and transmission of the Smart Fortwo. First of a…

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos