Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the turbocharger of the Smart Fortwo 0.8 CDI

Model: Smart Smart 450 - Years 1998-2007
Part: Turbocharger

Today we will see the instructions that will allow us to disassemble and replace the turbocharger of the Smart Fortwo 0.8 CDI. First of all, lift the car and move to the rear, accessing the bottom of the engine; then locate the turbocharger and disconnect the exhaust gas recirculation manifold from it, unscrewing the bolts, as shown in the video. At this point, disconnect the plastic sleeve and disconnect the electrical connector, removing and replacing the turbine with the new original one, following the video tutorial until the end!

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the turbocharger of the Smart Fortwo 0.8 CDI.
How to disassemble the turbocharger of the Smart Fortwo 0.8 CDI.
Smart (1998-2007 / 450) Let's see in this guide how to disassemble and replace the turbocharger of the Smart Fortwo 0.8 CDI. First, we open the rear hatch and start unscrewi…
How to remove the intercooler of the Smart Fortwo 0.8 CDI
How to remove the intercooler of the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) Let's see in this short video the main steps that will allow us to remove and replace the intercooler of the Smart Fortwo, with 0.8 CDI engine. First…
How to replace the transmission oil in the Smart Fortwo CDI.
How to replace the transmission oil in the Smart Fortwo CDI.
Smart (1998-2007 / 450) Shortly, we will see the steps necessary to replace the transmission oil of the Smart Fortwo CDI. It is possible to perform the oil change operation …

Other guides you may be interested in

How to Remove the Instrument Cluster from a Volkswagen Golf 4

How to remove the instrument cluster from a Volkswagen Golf 4? Follow these steps for removal. Disconnect the plastic trim around the steering wheel (top part) and remove it from the dashboard. Next, detach the trim below the instrument cluster; unscrew the securing screws of the instrument cluster with a screwdriver. After removing the screws, pull the unit out from the dashboard and disconnect the power cable. Install a new unit or replace the LEDs/bulbs in the original cluster and refit it. Finally, reverse the steps taken for reassembly.

Watch the video!


by ScegliAuto

More videos