Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Dashboard

Start by unscrewing the screws located at the bottom of the holes on the lower part of the steering column. This will allow you to detach the upper part of the steering column; simply lift it from both outer sides. You can replace just the bulbs as shown in the video; unscrew the affected bulbs, which are held in place by small orange caps. Remove these caps to access the bulb that needs replacing. Alternatively, you can disconnect the green connector to replace the entire unit without issues. That's it!

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tailgate of a Smart Fortwo
How to Remove the Tailgate of a Smart Fortwo
Smart (2007-2015 / 451) How do you remove the tailgate of a Smart Fortwo to repair the lock? Follow this guide: release and lower the tailgate of your car. Using a socket sp…
How to remove the intercooler of the Smart Fortwo 0.8 CDI
How to remove the intercooler of the Smart Fortwo 0.8 CDI
Smart (1998-2007 / 450) Let's see in this short video the main steps that will allow us to remove and replace the intercooler of the Smart Fortwo, with 0.8 CDI engine. First…
Smart Fortwo 451 1.0 MHD clutch disassembly instructions
Smart Fortwo 451 1.0 MHD clutch disassembly instructions
Smart (2007-2015 / 451) In today's video tutorial we will see the main steps to be able to remove and replace the clutch in a Smart Fortwo 451 1.0 MHD. To access the clutch …

How to Remove the Instrument Cluster from a Volkswagen Golf 4

How to remove the instrument cluster from a Volkswagen Golf 4? Follow these steps for removal. Disconnect the plastic trim around the steering wheel (top part) and remove it from the dashboard. Next, detach the trim below the instrument cluster; unscrew the securing screws of the instrument cluster with a screwdriver. After removing the screws, pull the unit out from the dashboard and disconnect the power cable. Install a new unit or replace the LEDs/bulbs in the original cluster and refit it. Finally, reverse the steps taken for reassembly.

Watch the video!


by ScegliAuto

More videos