Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Actyon
    4. : Removing the front door panel on the Ssangyong Actyon

SsangYong Actyon - Video tutorial

Model: SsangYong Actyon MK 1 - Years 2006-2018
Part: Door panel
Operation: Removing the front door panel on the Ssangyong Actyon

Let's see in this video tutorial how to remove the front door panel, in simple and quick steps, on the Ssangyong Actyon. First of all we open the front door and start by removing the plastic caps that we find on the door panel, in order to unscrew all the fixing screws that we find inside; we use a Phillips screwdriver to remove them, as shown in the video. Once all the screws of the panel have been removed, we can pry the sides to unhook and remove it, disconnecting the electrical connector and the handle cable on the back!


Posted on 22 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos